Edit Article FastIC and FastICpix developments

Error message

Notice: Undefined index: printableVersion in include() (line 16 of /drupal/7.72/sites/ep-news.web.cern.ch/themes/phdep/templates/page.tpl.php).

Printer-friendly version

PDF version

Title *

Summary

Leave blank to use trimmed value of full text as the summary.

Body

Precise time tagging is a hot topic in High Energy Physics and in other fields. A number of detector technologies are available but there are few multi-channel front-end ASICs capable of providing time tagging in the region of 10ps. This article describes two developments that are going on within the microelectronics section of the Electronics Systems for the Experiments group (ESE-ME). Both the FastIC and the FastICpix developments are based on a collaboration between ESE-ME and the Institut de Ciències del Cosmos of the University of Barcelona (<a href="http://icc.ub.edu/">http://icc.ub.edu/</a>).

The collaboration started in 2016 after the authors of this note co-organized a one-week summer school in Barcelona about solid-state semiconductor radiation detectors. That school, called the first Barcelona Techno Week, was attended by more than 60 students, mainly from Europe but also from the United States, Canada and even New Zealand. We had excellent lecturers including Erik Heijne (CERN), Paul O’Connor (BNL), Angelo Rivetti (INFN-Torino) or Angel Rodriguez and Ricardo Carmona from University of Sevilla, who covered radiation detectors from the basic principles to the state of the art, from interaction of radiation with matter to applications. That was the school we would have liked to have attended when we started in the field of design of electronics for radiation detectors.

After that organizational experience, the authors decided to start the FastIC project to design an Application Specific Integrated Circuit (ASIC), in 65nm CMOS technology, for the readout of fast timing detectors with an intrinsic gain of ~105-106 (examples of these detectors are Silicon PhotoMultipliers, Micro Channel Plates or Photomultiplier tubes). The first prototype was submitted to fabrication in May this year and includes a fully functional design with 8 single-ended channels. The FastIC chip is designed to replace the NINO, an ASIC implemented in 250nm CMOS, and to improve on its performance. The NINO ASIC [1] was designed in 2004 for the ALICE Time of Flight detector and, to the credit of its designers, it is still today a reference for the readout of fast detectors with low jitter. However, there are a few limitations: the energy measurement, based on the Time-over-Threshold method is non linear, its power consumption is large and it does not have build-in testing capabilities.&nbsp;

As NINO is widely used outside of CERN we were able to obtain financial support for the project from the KT fund. This funding allowed us to hire a PhD student, Jose Maria Fernandez-Tenllado, and to contribute financially to the submission of two Multi-Project Wafer (MPW) runs. As chance would have it, the authors met Jose Maria Fernandez-Tenllado at the first Barcelona Techno Week. Jose subsequently came to EPFL for his Masters Thesis. While in Lausanne, he visited our CERN labs at the time we had an opening for a PhD position to work in the FastIC design and to which he successfully applied.&nbsp;

There are many challenges when designing electronics for the readout of fast detectors. One of the challenges is related to the interconnection between the sensor and the readout ASIC. The jitter, that is the uncertainty in the time measurement,&nbsp; has the following expression:

&nbsp;σt = σn / (ds/dt)

Where σn is the noise of the system and ds/dt is the derivative of the signal (which can be a voltage or a current signal). The intrinsic inductance of the interconnection filters the high frequency components of the signal delivered by the sensor reducing the slope of the input current pulse entering into the front-end [2]. Since the jitter is inversely proportional to the slope of the signal, it is degraded by the effect of the inductance. The input capacitance of the sensor is another factor that limits the slope of the signal at the preamplifier input. A careful study has to be done in order to optimize the input impedance of the electronics to avoid ringing in the signals due to resonances of the input network and the study also has to address considerations related to the optimum bandwidth of the input front-end. Designing for a bandwidth above this optimum there is a penalty in the jitter because of an excess in noise and in power consumption [3]. The large range in the input capacitance of the detectors and the input dynamic range for detectors like SiPMs (from a few μA to mA) make the design of the input stage and the signal processing very challenging (e.g. the input capacitance for MCPs can be in the order of ~10pF whereas the input capacitance for SiPMs can be from ~100pF to ~1nF).&nbsp;

Another challenge consists in the limitations imposed by the choice of the technological node for manufacturing the ASIC. Trends in the microelectronics industry and the need for increased signal processing speed and performances oblige the radiation instrumentation community to continue to follow Moore’s Law in the development of front-end electronics. Moreover, the adoption of new technologies can add significant benefits and open new applications. Therefore, the new front-end has been designed in the most recent CMOS technology to which we have regular access (65nm CMOS). However, each new technology node requires a significant effort to understand how high performance analog designs can be implemented. The main challenges imposed by the very deep submicron technology have been, in particular, the reduced power supply voltage (1.2V) that results in a reduction of the dynamic range, the reduction in the intrinsic gain of the transistor and increased gate leakage currents with respect to previous technological nodes. &nbsp;

FastIC

The FastIC chip reads out the signal delivered by the sensor and processes it in a current mode method. A block diagram is shown in Figure 1. The architecture is based on the HRflexToT chip [4].

Figure 1. Block diagram of the FastIC ASIC channel when programmed in a single ended architecture. The Input Stage, the Time, Energy and Trigger channels and the Output driver are shown.

The input stage generates three replicas of the incoming signal, the weight of each replica being different. The first replica, with the highest weight, corresponds to the timing signal that is sent to a fast current discriminator which compares the signal with a programmable threshold. This threshold can be set at level below the charge delivered from the sensor when a single photoelectron is detected. The leading edge of the signal at the comparator output retains the information of the time of arrival of the detected particle. The chip can be programmed to output this signal for each channel. It also outputs a fast-OR combining the timing signals of all the channels.

The second replica is processed by some circuitry in order to measure the deposited energy in the sensor. The processing chain contains a transimpedance amplifier, a shaper (with a selectable peaking time, the nominal being ~25ns-50ns), a peak detector and hold (PDH) and a discriminator that compares the output of the PDH with a ramp. The time duration of the digital pulse at the output of this discriminator is proportional to the charge delivered by the sensor.&nbsp;

The third replica is used for the trigger signal whose threshold is typically set to be higher than the threshold of the timing channel. Two trigger signals can be generated. The Low Level Trigger and the Cluster Level Trigger. The Low Level Trigger is the OR of the output of the comparators of the trigger channels and the Cluster Level Trigger compares the sum of the signals deposited in all the channels in a chip with a separate threshold. These trigger signals can be used to start the ramp generator for the energy to time conversion. Alternatively, the OR of the fast timing channels or a pulse fed externally into the chip can also be used for this purpose.&nbsp;

At the output of the time and energy processing branches, the channel can be programmed to provide (1) The Time-Of-Arrival information only, (2) the Time over Threshold information or (3) a combination of the two. In the first case, the energy branch is bypassed and as a consequence, the pulses at the fast discriminator output can be very short, the maximum flux that can be processed by the channel being only dependent on the signal of the detector itself. In the latter case, the channel generates two pulses for an incoming input signal. The first pulse’s rising edge contains the information of the ToA and the second pulse’s width contains the information on the linear energy measurement. The maximum count rate that the chip can process in this mode is ~2MHz.

The input stage can be programmed to work in either positive or negative polarity. In the case of a detector with a differential output, the 8 single ended channels can be reconfigured into 4 differential channels. It is also possible to combine 4 channels and sum their signals at the ouput of the input stage. This active summation functionality is integrated to explore the impact of segmenting large SiPMs (with large capacitance) into smaller ones to achieve lower jitter while covering large detector areas. The expected performance of the chip is presented in Table 1.

In FastIC the readout channels are laid out in a linear way and the chip inputs are wire-bonded to a PCB or to a package. This interconnection scheme with its associated added inductance limits the time performance of the system as described above. Also, the large intrinsic capacitance in sensors like Silicon Photomultipliers leads to a reduction of the input signal amplitude in current sensing and processing circuits. The combination of both effects limits the slew rate of the signal and as a consequence the system suffers from an increased jitter. This lead the design team to propose a new sensor architecture whereby the sensor and readout electronics are intimately connected: the FastICpix concept. &nbsp;

FastICpix

FastICpix is a detector architectural study, funded by an ATTRACT phase I grant, which aims at at 10ps time resolution by proposing a new hybrid sensor and readout electronics. The proposed hybrid interconnection minimizes the effects of parasitic components associated with interconnects and enables sensor segmentation to reduce dramatically the effective capacitance.

The FastICpix sensor concept is based on the readout of groups of Single Photon Avalanche Diodes (SPADs) by a readout chip. The connection is done using bump bonding (with pitch ~300μm). The SPADs are implemented in a process optimized for light detection and are Front-Side Illuminated. They are grouped in clusters and connected to the back-side of the sensor chip by means of a TSV last process [5]. A Redistribution Layer (RDL) layer is also implemented to connect the TSV with the bump-bonding pad. The bonding pad is connected to a readout circuit designed in 65nm CMOS technology. The reduction of the input capacitance due to the interconnection and due to the segmentation results in a larger current signal at the input of the front-end, which helps to reduce the jitter. The pixels are configured so that the signals from different sensor elements can be summed. This means that the granularity is configurable. It will be possible to trade off between time resolution, spatial resolution, power and data rate to optimize the operation of the hybrid sensor to different applications. The readout ASIC is designed abuttable on 4 sides to build large seamless detection areas.

The Phase I FastICpix project deliverables consists of a feasibility study based on a full Monte Carlo simulation including a physical simulation of the scintillator crystal, the sensor and the readout electronics. The study provides a framework to globally optimize the detector system for a given application (e.g. Positron Emission Tomography).

The work on the integration of the sensor elements with the analog front-end electronics has shown that segmenting large area SiPMs and actively summing the signals in adjacent channels helps improving the Single Photon Time Resolution (SPTR).

The design of the digital part of the chip is also challenging and it is based on the lessons learnt in the Timepix3 [6] and Timepix4 [7] chips. In order to time stamp the incoming photons, a TDC is implemented on each pixel. The TDC is based on a ~2GHz (nominal) ring oscillator with 12 phases that is started with the arrival of a signal and is stopped at the following rising edge of the system clock (≤100MHz). The ring oscillator is active a small fraction of time in order to minimize power consumption. System clock is interpolated in two steps: first, a counter increases its value with every oscillation of the ring, and second, the internal phases of the ring oscillator are latched at the rising edge of the system clock in order to obtain a fine time measurement (20-ps time bin). The study on the TDC has been done in collaboration with the group of Angel Rodriguez and Ricardo Carmona from University of Sevilla whom the authors met in the framework of the Barcelona Techno Week in 2016 and who assigned a PhD student in the last months of his doctoral studies, Franco Bandi, to work on the FastICpix project.

A study on how to distribute the system very low-jitter clock to all the pixel elements with low power consumption is in progress. This study is based on the Timepix4 Clock Distribution Network (CDN) architecture, which consists of a Digital Delay Locked Loop in which the delay line is distributed along two columns of pixels, a phase comparator and a control system located at the base of every double column [7]. The novelty in the approach for FastICPix is that the control of every delay cell in the line is done individually, which provides a finer adjustment of the delay of the line and thus reduces the systematic error associated to the CDN.

Summary

The FastIC project aims at designing an ASIC with a linear array of channels for sensor readout. It provides a fast timing signal as well as signal processing to obtain a linear energy to time conversion. This chip could be read out by the picoTDC, a Time-To-Digital Converter designed at the microelectronics section at CERN. As well as High Energy Physics the chip could find applications in fields such as Positron-Emission-Tomography (PET), LIDAR and biology.

The FastICPix project aims at 10ps time resolution by proposing a new hybrid sensor and readout electronics. Its architecture can also be used with other types of sensors like Micro Channel Plates (MCPs) and other fast detectors with intrinsic amplification.

Many of the people participating in the two projects presented in this article have met while preparing training activities for younger colleagues. Organizing the Barcelona Techno Week event was a good way to prepare teaching material about the basic principles and the state of the art in our field and share it with other colleagues from our organizations and from external ones. But it also had some other side effects. It proved to be a way to recruit good students and also led us to establish personal links and solid collaborations.

Bibliography

[1]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; F. Anghinolfi, P. Jarron, F. Krummenacher, E. Usenko, and M. C. S. Williams, “NINO, an ultra-fast, low-power, front-end amplifier discriminator for the Time-Of-Flight detector in ALICE experiment,” IEEE Nucl. Sci. Symp. Conf. Rec., vol. 1, pp. 375–379, 2003, doi: 10.1109/nssmic.2003.1352067.

[2]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; F. Ciciriello, F. Corsi, F. Licciulli, C. Marzocca, and G. Matarrese, “Interfacing a SiPM to a current-mode front-end: Effects of the coupling inductance,” 2014 IEEE Nucl. Sci. Symp. Med. Imaging Conf. NSS/MIC 2014, pp. 6–11, 2016, doi: 10.1109/NSSMIC.2014.7431046.

[3]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; J. M. Fernández-Tenllado, R. Ballabriga, M. Campbell, D. Gascón, S. Gómez, and J. Mauricio, “Optimal design of single-photon sensor front-end electronics for fast-timing applications,” in 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2019, pp. 1–5, doi: 10.1109/NSS/MIC42101.2019.9059805.

[4]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; S. Gómez-Fernández et al., “A High Dynamic Range ASIC for Time of Flight PET with monolithic crystals,” PoS, vol. TWEPP2018, p. 85, 2019, doi: 10.22323/1.343.0085.

[5]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; T. Tick and M. Campbell, “TSV processing of Medipix3 wafers by CEA-LETI: A progress report,” J. Instrum., vol. 6, no. 11, 2011, doi: 10.1088/1748-0221/6/11/C11018.

[6]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; T. Poikela et al., “Timepix3: A 65K channel hybrid pixel readout chip with simultaneous ToA/ToT and sparse readout,” J. Instrum., vol. 9, no. 5, 2014, doi: 10.1088/1748-0221/9/05/C05013.

[7]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; X. Llopart et al., “Study of low power front-ends for hybrid pixel detectors with sub-ns time tagging,” J. Instrum., vol. 14, no. 1, 2019, doi: 10.1088/1748-0221/14/01/C01024.

&nbsp;

<div style="background-color: #1E90FF ; padding: 10px; border: 1px solid blue;">
<h3 dir="ltr">TORCH detector for precision searches </h3>

<h3 dir="ltr">by Rui Gao (Uni. Oxford), Thierry Gys&nbsp;(CERN) and Neville Harnew (Uni. Oxford)</h3>

The TORCH detector combines Time-of-Flight and Cherenkov techniques to provide charged particle identification at low momentum. The Time-of-Flight measurement requires an overall time resolution of 70 ps for single photons, with the contribution from the photon detector and electronics providing better than 50 ps included in quadrature. It is therefore an application that will benefit from the new developments of fast electronics. TORCH is a candidate technology to identify B-meson decay products for a future upgrade of the LHCb experiment.&nbsp;

Figure 1: 3D CAD view (left) and photograph (right) of a TORCH module prototype equipped with a&nbsp;full-width (660mm) half-length (1250mm) quartz radiator plate and instrumented with MCP photon detectors and fast readout electronics.

The TORCH detector uses 660 × 2500 × 10 mm3 quartz modules to generate Cherenkov photons. The photons propagate by total internal reflection to the periphery of the plate, where they are focused onto a linear array of Micro-Channel Plate (MCP) photon detectors, each detector covering a 53 × 53&nbsp;mm2 active area. A TORCH MCP measures the photon time of arrival and has an 8 × 64 pixelization which utilizes a charge-sharing technique that enhances the granularity to 8 × 128. With a 5 × 105 MCP gain, a photoelectron generates a 1-2&nbsp;ns wide charge pulse at the MCP output. The pulse width (Time-Over-Threshold TOT) is then used to correct for time walk and is also used for the precise estimate of the charge centroids. These are required to reconstruct the photon path in the quartz. In order to achieve the above measurements, MCPs are instrumented with fast and low-noise analogue front-end ASICs, along with very high-resolution Time-to-Digital-Convertor ASICs. In addition to the time resolution requirement, simulation shows that TORCH will have an average 10&nbsp;% occupancy in LHCb Run&nbsp;4 with 2 × 1033 cm-2 s-1 luminosity. With such an occupancy, low dead time of around 1 ns is required to meet the performance goal. Furthermore, to improve MCP lifetime and recovery time, the MCPs will be run at low gain that requires a minimum 10fC threshold at the front-end. TORCH is expected to have less than a 100&nbsp;krad radiation dose, however some level of radiation tolerance is required.

Fig. 2&nbsp;(a) The distribution of photon arrival times as a function of fine-grain pixel coordinate in a MCP for 8 GeV/c incident pions. The overlaid lines show the predicted times of arrival. Distinct&nbsp;bands can be seen, corresponding to the photon paths shown in (b). Measured time resolutions&nbsp; approach the desired 70 ps per photon.&nbsp;VCI2019 proceedings -&nbsp;NIMA 958, 1 April 2020, 162060

At time of writing, TORCH prototypes have been instrumented with NINO and HPTDC ASICs, which have given a sub-70&nbsp;ps overall time resolution. In order to demonstrate the potential performance of TORCH, it is planned to upgrade a part of the electronics of the prototypes with the latest technologies on the horizon, namely the FastIC and PicoTDC chips.

&nbsp;
</div>

&nbsp;

More information about text formats

Text format

Full HTML

Web page addresses and e-mail addresses turn into links automatically.
Lines and paragraphs break automatically.

Filtered HTML

Web page addresses and e-mail addresses turn into links automatically.
Allowed HTML tags: <a> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
Lines and paragraphs break automatically.

Plain text

No HTML tags allowed.
Web page addresses and e-mail addresses turn into links automatically.
Lines and paragraphs break automatically.

Vertical Tabs

Menu settings

Revision information

Create new revision

Revision log message

Provide an explanation of the changes you are making. This will help other authors understand your motivations.

Printer, email and PDF versions

Printer-friendly version

Show link

Show link in individual comments

Show Printer-friendly URLs list

PDF version

Show link

Show link in individual comments

Show Printer-friendly URLs list

Paper size

Choose the paper size of the generated PDF.

Page orientation

Choose the page orientation of the generated PDF.

URL path settings

Generate automatic URL alias

Uncheck this to create a custom alias below. Configure URL alias patterns.

URL alias

Optionally specify an alternative URL by which this content can be accessed. For example, type "about" when writing an about page. Use a relative path and don't add a trailing slash or the URL alias won't work.

URL redirects

Add URL redirect to this node

From	Status	Type	Count	Last accessed	Operations
No URL redirects available.

Authoring information

Authored by

Leave blank for Anonymous.

Authored on

Format: 2020-06-22 11:13:39 +0200. The date format is YYYY-MM-DD and +0200 is the time zone offset from UTC. Leave blank to use the time of form submission.

Publishing options

Published

Promoted to front page

Sticky at top of lists

CERN Accelerating science